<ins id="prt9t"></ins><ins id="prt9t"><form id="prt9t"></form></ins>

        <cite id="prt9t"></cite>

            歡迎訪問專業卷染機生產廠家無錫市金潤達染整設備廠,現在是2022年12月01日 星期四 

             Email  | English

            返回首頁 公司簡介 產品展示 新聞資訊 榮譽資質 聯系我們

            當前位置:首頁 > 新聞資訊

            染整廠的卷染機的軸承潤滑改良

            發布時間:2022-12-01 09:08:00 點擊:

            U.LUBE team on-site service case: Bearing lubrication improvement solution for dye-jigger in dyeing plant

            卷染機,常溫常壓巨型卷染機,高溫高壓自動卷染機,常溫常壓大卷裝自動卷染機

            卷染機專業生產廠家無錫金潤達2022年12月1日訊 某染整廠有140臺卷染機,采用某牌普通潤滑劑進行潤滑,目前卷染機的軸承潤滑均出現不同程度問題。

            A dyeing factory has 140 sets of Dye-jiggers, using a brand of ordinary lubricant for lubrication, at present, its dye-jiggers have different degrees of problems on bearing lubrication.

            經優潤(U.LUBE)團隊現場調研,卷染機主要潤滑部件是軸承,軸承工況有高溫、水汽、化學污染等,現有問題如潤滑油使用周期短,油品有氧化結碳等現象。

            After U.LUBE team's on-site research, the main lubricating parts of the dye-jigger are bearings, which are affected by high temperature, water vapor, chemical pollution, etc. The existing problems include short service life of lubricating oil and oxidation of carbon in lubricant.


            卷染機,常溫常壓巨型卷染機,高溫高壓自動卷染機,常溫常壓大卷裝自動卷染機

             如上圖所示,軸承油品結碳嚴重,需要3天加一次油。

            As photo shown above, the bearing lubricant is heavily carbonized and needs to be refilled every 3 days.


            針對卷染機的氧化結碳、使用周期短等問題,經優潤(U.LUBE)團隊分析建議,使用具有良好的潤滑性及密封性、抗水性的軸承專用脂如優潤(U.LUBE)高性能聚脲基合成脂ET UPLEX 32S,高溫下物理和化學性能穩定,稠度變化小,且潤滑性能保持好,在有水及潮濕環境下,潤滑表現良好,可避免金屬表面由于接觸引起的磨損并防止其它流體及雜物滲入從而縮短機件的使用壽命,同時具有長壽命,極大降低能源消耗及潤滑頻率,能延長加油周期,減少頻繁人工加油,提高生產效率。

            For the problems of oxidation carbonization and short life cycle of dye-jigger, our U.LUBE team suggested to use a special grease for bearings with good lubricity and sealing, water resistance, such as U.LUBE high performance polyurea-based synthetic grease ET UPLEX 32S. It has stable physical and chemical properties under high temperature, stable consistency, and good lubrication performance. It can avoid the wear of metal surface caused by contact and prevent the penetration of other fluids and debris to shorten the service life of machine parts, and has long life, greatly reduces energy consumption and lubrication frequency, extends the refueling cycle, reduces frequent manual refueling, and improves productivity. It also has a long life, greatly reduces energy consumption and lubrication frequency, extends the refueling cycle, reduces frequent manual refueling, and improves productivity.

            本站關鍵詞:卷染機,常溫常壓卷染機,高溫高壓卷染機

            本站信息來源于網絡或者原創,如有冒犯貴網站版權的,請與我們取得聯系!

            卷染機專業生產廠家無錫金潤達咨詢電話:0510-83383369

          1. 上一資訊:織物在染整各環節中容易出現的問題匯總

          2. 染整廠的卷染機的軸承潤滑改...  織物在染整各環節中容易出現...  染整生產斑漬產生原因、鑒別...  針織染整常見質量問題及預防...  卷染機之含氨綸彈性織物染整...  

              返回首頁 | 公司簡介 | 產品展示 | 新聞資訊 | 榮譽資質 | 聯系我們 | 
             電話:86-510-83383369傳真:86-510-83382258 E-mail:rd@runda2008.com  手機:013506178550
            網站關鍵詞: 卷染機,定型機,涂層機,烘干機,滴塑機,液流機,ERP
            友情鏈接:  B1級擠塑板 


             
             

            国产东北一级真人毛卡片_国产精品视频一区二区噜噜_免费A∨一区二区三区AV_国产午夜成人无码免费视频_91精品免费观看